Page 7 - Datacomtools 2015 Catalog
P. 7
Chaser Ethernet Speed Certifier
Test and Speed Certify Ethernet Cable up to 1GB
Test & Speed Certify Ethernet Cables to 1 GB Network Configuration and Capability Testing
The Net Chaser™ Ethernet Speed Certifier offers a com- The NetChaser’s advanced discovery gives the clearest
plete solution to test and speed certify the data-carrying vision of network layout and interfaces between active
capabilities of Ethernet network cables up to 1 Gb/s by components like servers, switches, routers, etc. All the
testing for noise in the network, detecting faults in the information is collected, stored, and ready for reporting.
cable wiring, and ensuring that cables are able to sup- 21st century speed certification.
port the speed capabilities of active equipment.
- Speed Certification to IEEE standards 802.3 - Pings specific IPs or URL addresses UIMNSATAHDEE
- Cable testing to TIA568A/B - DHCP
- Traceroute
- VLAN
Cable Testing Network Configuration and Capability Testing Scan the QR Code
To certify Ethernet speed performance of cable runs, The Net Chaser™ includes a comprehensive set of to see the T3
the Net Chaser™ conducts Bit Error Rate (BER) tests features for testing active network capabilities: measure
(using Active Remote) by sending data packets down Power over Ethernet (PoE) to ensure the correct power Net Chaser video
specified cable runs at defined data rates to check for is available on the correct pins, use Port Discovery to
errors at the maximum throughput of the link. The Net ensure the correct speed and duplex capability are
Chaser™ reports on signal quality that can impact high- available; connect at gigabit Ethernet and run ping tests
speed data transmission by measuring signal-to-noise to verify connectivity to IP hosts; discover network de-
ratio (SNR). Skew measurements report on the signal vices using Cisco Discovery Protocol (CDP) or Link Layer
time delay between pairs that can impact Gigabit data Discovery Protocol (LLDP); VLAN discovery; Traceroute
transmission. Finally, the Net Chaser™ unit provides function displays the path internet packets travel to
continuity testing that detects opens, shorts, miswires, reach a specified destination. The Net Chaser™ also
split pairs, reversals, and high-resistance faults while saves test reports and exports to PC’s.
accurately measuring distance to faults and total cable - Active Ethernet (Link Capability & Link Status)
length. - Detects PoE/PoE+ and load test for voltage drop
- Measures length for each pair in feet or meters - IPV4 Support (IPV6 available late 2015)
- Improperly terminated cables are clearly displayed on - VLAN Discovery
a color graphical wire-mapping display - Ping to a specific IP or URL address
- Detects Length to Opens & Shorts - Ping up to 8 addresses at a time
- Verifies Continuity for RJ45, and Coax cables - Link Light
- Saves test results and easily uploaded to a computer - DHCP
- Tone Generation - Discovers CDP and LLDP Protocols
- ID Only remotes (Network & Coax) up to 20 available. - Traceroute
- Testing and ID Remotes - up to 8 available.
NC950-AR Net Chaser with an Active Remote in a T3 large pouch $1799.95
AR104 Net Chaser Active Remote (user defined remote ID 1-4) $299.95
PC060 Net Chaser Protective Case $164.95
Physical Features Signal Quality Testing
- 3.5” Color Touch Screen Display - Length of cable distance to Opens and Shorts
- Compact Form Factor - SKEW
- 3rd Generation Rechargeable Lithium-Ion Batteries - Echo Testing - impedance mismatches
- Benchtop, Handheld, or Hung Up - Signal to Noise Ratio
- Uses Modular Cable Interfaces
- SD Card for Data File Transfer of Cable Tests » Attenuation
- Field-Upgradeable Firmware » Amplitude
» Return Loss
Connectors Performance and Speed Certification
- 8-Position shielded modular jack (Data) - Supports IEEE 802.3 signal speed carrying
- F-coax (video) specifications to 1 gigabit
- Test interconnect specifi cations per TI568/570
Active Remote - Measures the quality of the signal through the
- User-selectable ID #1-4 cable against set criteria on cable data-carrying
- Pass or fail indication capability in real time. 100Mbit/gigabit speeds
- Lithium-ion batteries - Real-time testing on the performance capability of
the cable
Cable Testing
Major Credit Cards Accepted 1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com 7
Test and Speed Certify Ethernet Cable up to 1GB
Test & Speed Certify Ethernet Cables to 1 GB Network Configuration and Capability Testing
The Net Chaser™ Ethernet Speed Certifier offers a com- The NetChaser’s advanced discovery gives the clearest
plete solution to test and speed certify the data-carrying vision of network layout and interfaces between active
capabilities of Ethernet network cables up to 1 Gb/s by components like servers, switches, routers, etc. All the
testing for noise in the network, detecting faults in the information is collected, stored, and ready for reporting.
cable wiring, and ensuring that cables are able to sup- 21st century speed certification.
port the speed capabilities of active equipment.
- Speed Certification to IEEE standards 802.3 - Pings specific IPs or URL addresses UIMNSATAHDEE
- Cable testing to TIA568A/B - DHCP
- Traceroute
- VLAN
Cable Testing Network Configuration and Capability Testing Scan the QR Code
To certify Ethernet speed performance of cable runs, The Net Chaser™ includes a comprehensive set of to see the T3
the Net Chaser™ conducts Bit Error Rate (BER) tests features for testing active network capabilities: measure
(using Active Remote) by sending data packets down Power over Ethernet (PoE) to ensure the correct power Net Chaser video
specified cable runs at defined data rates to check for is available on the correct pins, use Port Discovery to
errors at the maximum throughput of the link. The Net ensure the correct speed and duplex capability are
Chaser™ reports on signal quality that can impact high- available; connect at gigabit Ethernet and run ping tests
speed data transmission by measuring signal-to-noise to verify connectivity to IP hosts; discover network de-
ratio (SNR). Skew measurements report on the signal vices using Cisco Discovery Protocol (CDP) or Link Layer
time delay between pairs that can impact Gigabit data Discovery Protocol (LLDP); VLAN discovery; Traceroute
transmission. Finally, the Net Chaser™ unit provides function displays the path internet packets travel to
continuity testing that detects opens, shorts, miswires, reach a specified destination. The Net Chaser™ also
split pairs, reversals, and high-resistance faults while saves test reports and exports to PC’s.
accurately measuring distance to faults and total cable - Active Ethernet (Link Capability & Link Status)
length. - Detects PoE/PoE+ and load test for voltage drop
- Measures length for each pair in feet or meters - IPV4 Support (IPV6 available late 2015)
- Improperly terminated cables are clearly displayed on - VLAN Discovery
a color graphical wire-mapping display - Ping to a specific IP or URL address
- Detects Length to Opens & Shorts - Ping up to 8 addresses at a time
- Verifies Continuity for RJ45, and Coax cables - Link Light
- Saves test results and easily uploaded to a computer - DHCP
- Tone Generation - Discovers CDP and LLDP Protocols
- ID Only remotes (Network & Coax) up to 20 available. - Traceroute
- Testing and ID Remotes - up to 8 available.
NC950-AR Net Chaser with an Active Remote in a T3 large pouch $1799.95
AR104 Net Chaser Active Remote (user defined remote ID 1-4) $299.95
PC060 Net Chaser Protective Case $164.95
Physical Features Signal Quality Testing
- 3.5” Color Touch Screen Display - Length of cable distance to Opens and Shorts
- Compact Form Factor - SKEW
- 3rd Generation Rechargeable Lithium-Ion Batteries - Echo Testing - impedance mismatches
- Benchtop, Handheld, or Hung Up - Signal to Noise Ratio
- Uses Modular Cable Interfaces
- SD Card for Data File Transfer of Cable Tests » Attenuation
- Field-Upgradeable Firmware » Amplitude
» Return Loss
Connectors Performance and Speed Certification
- 8-Position shielded modular jack (Data) - Supports IEEE 802.3 signal speed carrying
- F-coax (video) specifications to 1 gigabit
- Test interconnect specifi cations per TI568/570
Active Remote - Measures the quality of the signal through the
- User-selectable ID #1-4 cable against set criteria on cable data-carrying
- Pass or fail indication capability in real time. 100Mbit/gigabit speeds
- Lithium-ion batteries - Real-time testing on the performance capability of
the cable
Cable Testing
Major Credit Cards Accepted 1.800.543.4333 • Fax 203.325.2198 • www.datacomtools.com 7
