Labor Saving Devices Creep Zit Series

This is our most advanced and best value threaded connector rod kit for running wire and cable

  Kit Includes:
- Five FiberFuse 6ft. Push/Pull Rods with Male and Female Threaded Connector Ends
- One Luminous (Glows in the Dark) FiberFuse 6 ft. Push/Pull Rod with Male and Female Threaded Connector Ends
- One 6 ft. Fish Tailz 1/8" Mesh Pull Stock
- Whisk Threaded Tip
- Ball Chain Threaded Connector Tip (12" Ball Chain Length)
- Male Bull Nose Threaded Connector Tip
- Female Bull Nose Threaded Connector Tip
- Kit is Packaged in a Clear Square Plastic Tube.

	This kit offers the essential components needed for a wide range of installation applications.
	Kit Includes:
-	Four FiberFuse™ 6ft. push/pull rods with male and female threaded connector ends
-	One FiberFuse 6ft. push/pull rod with a fixed bull nose end and a female threaded connector end
-	Luminous Whisk Threaded Connector Tip
-	Lighted Bull-Nose Threaded Connector Tip
-	Ball Chain Lanyard (12” length)
-	Kit is packaged in a clear square plastic tube

	This kit is the luminous (glow in the dark) version of the standard Creep-Zit 30ft.
	Kit Includes:
-	Four Luminous (glows in the dark) FiberFuse™ 6ft. push/pull rods with male and female threaded connector ends
-	One Luminous (glows in the dark) FiberFuse 6ft. push/pull rod with a fixed bull nose end and a female threaded connector end
-	Whisk Threaded Connector Tip
-	Lighted Bull-Nose Threaded Connector Tip
-	Ball Chain Lanyard (12" length)
-	Kit is packaged in a clear square plastic tube

6ft rod with Male/Female Connectors

This rod kit provides shorter 3ft. rods for more versatility and functionality in confined spaces and includes a soft case with handle straps that enable the kit to be carried like a arrow "quiver" case on your shoulder.

Use the Creep-Zit compact rod kit for limited access spaces where typical 6ft. Rods are difficult to use. The unique "quiver" case can be hung on your shoulder to allow you to draw out rods one at a time. Use the convenient zippered side pocket to hold you whisk. Use the convenient zippered case pocket to hold your whisk tip and ball and chain lanyard for easy access.

  Kit Includes:
- Seven FiberFuse 3ft. Push/Pull Rods with Male and Female Threaded Connectors Ends
- One Luminous (Glows in the Dark FiberFuse 3ft. Push/Pull Rod with a Fixed Bull Nose End and Female Threaded Connector End
- Whisk Threaded Connector Tip
- Ball Chain Lanyard (12" Length)
- Premium Nylon Shoulder "Quiver" Case with Zippered Tip Pocket.

Creep-Zit Drag-Zit Magnet Male Threaded Connector Tip

Compatible with both the Creep-Zit rods and the Grabbit telescoping poles (with included adapter). This handy tip is helpful in crawling spaces, ceiling spaces, and other hard to reach areas.

Creep-Zit Z-Tip Male Threaded Connector Tip

Fish wire way back in small cavity. The Z-Tip is compatible with both Creep-Zit threaded rods and the Grabbit telescoping pole (with included adapter.) The unique inside knife edge is used to grab wire and the outside "v" can be used to push or lay-up wire, if you can touch it, you can retrieve it.

Creep-Zit - J-Tip Male Threaded Connector Tip

Uncoil Coax or other cable. Use this tip for retrieving wire from a distance or retrieving metal fish tape. The J-Tip is compatible with both the Creep-Zit threaded rods and the Grabbit telescoping poles (with adapter).

Creep-Zit Male Threaded Ball Chain Tip (3-Pack)

Each screw-on tip has 12" of ball chain. Grab the ball chain with a magnet or hook and pull your rod to the desired access hole of location.

Creep-Zit Male Threaded Magnetic Bull Nose Tip & Compass

Special bull nose with magnet used in conjunction with the included compass to accurately locate the rod in insulated wall with moisture barrier or blown - in cellulose, Locate the tip of the rod before you drill a hole.

Creep-Zit Tip 6ft. x 1/8" Male Threaded Mesh Pull Sock

This non-metallic pull sock work like a "Chinese Finger Trap" to cover and securely pull wires up to one RG6 or equivalent in size.

Creep-Zit Replacing Female Threaded Bull Nose Ends (5-Pack)

These replacement bull nose ends must be glued-onto your rods using strong, two part epoxy (epoxy not included).

Creep-Zit Replacing Threaded Bull Nose Tip Pack

Pack includes three males and three females

Creep-Zit Replacing Threaded Connector Pack

Pack includes five male threaded connector, five female threaded connectors, and two bull nose replacement tips. All these replacement tips must be glued-onto your rods using strong, twp part epoxy (epoxy not included).

A complete Tip Kit and Case for Your Creep-Zit System!

This kit contains a wise range of specialized threaded connector tip for your Creep-Zit system. The kit is intended to complement your Creep-Zit Pro 36ft. Push/Pull Rod Kit (Model CZ30 or CZ30L) or the Creep-Zit 24ft. Compact Rod Kit (Model CZ24) by adding multiple specialty tips to meet a wide range of installation challenges.

All the tips in this kit are compatible with the Creep-Zit Threaded Connector System (not compatible with Roy Rods quick connect product o the Creep-Zit Heavy Duty). The Piggy-back Case is a 8-1/2" L x 3-1/2" W x 2" H semi-rigid zippered case with internal pockets and straps that hold and organize all your Creep-Zit tips, ball chain and other small objects. The Piggy-Back includes a padded hand strap on the top and two strong hook and look straps on the bottom that can hold a rod storage tube (up to 2-1/2" diameter).

  Kit Includes:
- Creep-Zit Threaded Z-Tip (For Secure Wire Retrieval)
- Creep-Zit Threaded J-Tip (For Pushing or Lay-Up)
- Creep-Zit Threaded Ceramic Magnet Retrieval Tip
- Creep-Zit Threaded Magnetic Locating Tip and Compass
- Creep-Zit Threaded Ball Chain Tip
- Creep-Zit Threaded Flex Tip
- Creep-Zit Threaded Screw Tip
- Creep-Zit Threaded Male Bull Nose Tip
- Creep-Zit Threaded Female Bull Nose Tip
- "Piggy-Back" Tip Storage Case