Fiber Optic Strippers

Sumitomo Electric introduces the industry’s first hot jacket remover with IPX1 waterproof protection. With both shock-resistant and waterproof features, the JR-6 is designed for optimum performance for easy fiber coating removal in harsh work environments.

  Product Features:
- Small stripping v-notch is designed to remove buffer and coating material from 125u fiber
- Large stripping v-notch is designed to strip wide range of outer cable jacket insulations
- Blade area heat-treated for durability
- Laser marked for easy identification
- Extra durable to withstand normal drops without requiring tool realignment

Improved version of the 1163 FIBerOptic with gripping plier removed to improve precision of strips. Also features new dual-durometer ProGrips for improved control.

- Precision ground stripping cavities for 2.0 - 2.4 mm outer jacket, 2.0 - 3.0 mm loose tube, 2.8 - 3.0 mm outer jacket, 900µm buffer insulation, 900/125 µm and 250/125 µm buffer/acrylate.
- Factory Calibrated

Three hole Fiber Optic Stripper model performs all common fiber stripping functions.

  Product Features:
- This Fiber Optic Stripper strips the 2-3 mm fiber jacket down to the 900 micron buffer coating.
- The second hole strips the 900 micron buffer coating down to the 250 micron coating.
- The third hole is used to strip the 250 micron cable down to the glass fiber without nicks or scratches.

- Used for stripping the 250 micron coating from the 125 micron optical fiber.
- Preset at the factory so no adjustments are necessary.
- Yellow plastic formed handles, tool is 6" long.

The Fiber Optic Stripper is used for stripping 250 micron buffer coating from 125 micron optical fiber.

  Product Features:
- Preset at the factory so no adjustments are necessary
- Unique design prevents nicks or scratches on the optical fiber plus blades are ground and hardened for long life
- Yellow plastic dipped handles 5 3/16" long

The latest development in wire stripping & cutting. Simply place the wire in the stripping slot. Squeeze and pull.

  Product Features:
- The wire is stripped and cut to the exact length required.
- Comes with cushioned ergonomic grips
- interchangeable blades 22-24 AWG and 24-26 AWG.
- a larger "V" opening on the pliers and no tools required for adjustments
- Supplied assembled.

22-24 AWG Replacement Blades for the JIC-4473

24-26 AWG Replacement Blades for the JIC-4473

The Wire Stripper and Cutter is designed to strip and cut the most commonly used stranded and single wire gauges 10 to 22 AWG and 2-3 mm fiber jackets.

  Product Features
- coil spring opening to reduce fatigue
- wire looping
- bending holes conveniently located
- black oxide finish
- locking mechanism
- cutting surfaces that are hardened, tempered and ground for superior performance.
- 6 ¾" long and weighing just 4.5 ounces.

Thermal Fiber Optic Stripper Fixed Blade
Thermo-mechanically remove coatings from optical fibers. High strength thermal stripper supports standard 125µm optical fibers, including 250µm, 400µm, and 900µm coated fibers. The heater is adjustable to 200°C and facilitates stripping difficult and baked-on coatings. Adjustable temperature and time settings to adapt to a variety of different coatings. Compact design, weighs less than a pound. Includes A/C power supply, cord and cleaning brush. Platforms supplied separately.

Thermal Fiber Optic Stripper Adjustable Blade
Thermo-mechanically remove coatings from optical fibers. High strength thermal stripper with adjustable stripping blade, which supports cladding diameters 40µm to 600µm acrylate coated fibers with buffer diameters up to 1200µm. The heater is adjust to 200°C and facilitates stripping difficult and baked-on coatings. Adjustable temperature and time settings to adapt to a variety of different coatings. Compact design, weighs less than a pound/ Includes A/C power supply, cord, and cleaning brush. Platforms supplied separately.

For Fitel, Fujikura, and Ericsson fiber holders use the corresponding platforms, for LDF and all others without fiber holders use the Jonard Universal Clamp

Thermal Fiber Optic Stripper Fixed Blade
Thermo-mechanically remove coatings from optical fibers. High strength thermal stripper supports standard 125µm optical fibers, including 250µm, 400µm, and 900µm coated fibers. The heater is adjustable to 200°C and facilitates stripping difficult and baked-on coatings. Adjustable temperature and time settings to adapt to a variety of different coatings. Compact design, weighs less than a pound. Includes A/C power supply, cord and cleaning brush. Platforms supplied separately.

Thermal Fiber Optic Stripper Adjustable Blade:
Thermo-mechanically remove coatings from optical fibers. High strength thermal stripper with adjustable stripping blade, which supports cladding diameters 40µm to 600µm acrylate coated fibers with buffer diameters up to 1200µm. The heater is adjust to 200°C and facilitates stripping difficult and baked-on coatings. Adjustable temperature and time settings to adapt to a variety of different coatings. Compact design, weighs less than a pound/ Includes A/C power supply, cord, and cleaning brush. Platforms supplied separately.

For Fitel, Fujikura, and Ericsson fiber holders use the corresponding platforms, for LDF and all others without fiber holders use the Jonard Universal Clamp

Thermal Fiber Optic Stripper Fixed Blade
Thermo-mechanically remove coatings from optical fibers. High strength thermal stripper supports standard 125µm optical fibers, including 250µm, 400µm, and 900µm coated fibers. The heater is adjustable to 200°C and facilitates stripping difficult and baked-on coatings. Adjustable temperature and time settings to adapt to a variety of different coatings. Compact design, weighs less than a pound. Includes A/C power supply, cord and cleaning brush. Platforms supplied separately.

Thermal Fiber Optic Stripper Adjustable Blade
Thermo-mechanically remove coatings from optical fibers. High strength thermal stripper with adjustable stripping blade, which supports cladding diameters 40µm to 600µm acrylate coated fibers with buffer diameters up to 1200µm. The heater is adjust to 200°C and facilitates stripping difficult and baked-on coatings. Adjustable temperature and time settings to adapt to a variety of different coatings. Compact design, weighs less than a pound/ Includes A/C power supply, cord, and cleaning brush. Platforms supplied separately.

For Fitel, Fujikura, and Ericsson fiber holders use the corresponding platforms, for LDF and all others without fiber holders use the Jonard Universal Clamp