| |
|
| |
1006 Series: Right-Angle WAP Wall Bracket |
| |
Many WAP manufacturers recommend WAPs be mounted in a horizontal orientation. Secure APs from most manufacturers in areas where wall mounting may be required, such as residence halls, hotels, and other hard lid venues. The WAP is partially recessed into the right-angle bracket, exposing only the antenna face of the AP. Conduit, raceways, and cable can be terminated in the bracket. The WAP can be locked in place using the manufacturer’s locking features. Specify AP and model when ordering. |
Features & Benefits
Conveniently and aesthetically install APs from leading vendors on walls
Enables APs to be mounted in preferred horizontal orientation
AP is partially recessed into bracket, providing aesthetic appearance
Can be mounted directly over telecommunications outlet
AP installs without lose hardware
Technical Specifications
Design: Right-angle mounting bracket for securing APs on walls. Designed to mount the AP in the preferred horizontal orientation. Designs available for leading AP makes and models (see Styles table)
AP is partially recessed into bracket, providing aesthetic appearance
AP can be secured using manufacturer’s locking features
Construction: 12 ga. white powder-coated steel
Size: See Styles Table
Measurements (Maximum values):
Width: 11 in.
Height: 11 in.
Depth: 2.5 in.
Item Weight: 4 lbs.
Shipping Weight: 6 lbs.
Includes
(1) Right-Angle Bracket
(1) AP mounting plate
(2) hollow tip wall anchors
(2) white plastic bolt head covers
(1) Installation instructions
